Angle valve has bronze body material and bronze trim. The valve is configured with PN10/16 pressure rating, bolted bonnet, outside screw & yoke, and raised face flanged according to DIN. Type Approved. Sea water..

Marine gate valves are opening and closing gates, the movement direction of the gate is perpendicular to the direction of fluid flow, and are used extensively throughout the ship.

Chaparral 18 5/8 X 17 INCH /GG Schmitt Boat Transom Gate This gate is constructed out of stainless steel. Measures approximately 18 5/8" H x 17" W tapered to 15 1/2" W overall. The inside measurements are 16 1/2" H x 14 7/8" W tapered to 13 1/2" W,...

XRP Boat Check Valve 732612 This flapper valve is comprised of anodized aluminum. The product uses a hinged metal gate with rubber gasket and must be installed with the direction of flow and against gravity or force..

Baja Boat AFT Gate 40686 Constructed out of aluminum, these gate catches measure approximately 2" long x 1/2" wide x 1" high overall. Has a 1" wide opening that tapers to 3/8" wide. Has (10) right hand and (10) left hand catches.

Boat Gate Latch Catch 241602 Constructed out of aluminum, these gate catches measure approximately 2" long x 1/2" wide x 1" high overall. Has a 1" wide opening that tapers to 3/8" wide. Has (10) right hand and (10) left hand catches.

TCI Fabrication Boat Drain Gate This drain gate is constructed out of stainless steel, and measures approximately 17" L x 7 3/4" (tapers to 3 3/8") W x 3/16" Thick overall. Mounts with (4) 3/16" holes approximately 15 1/2" apart width and 5" apart height.

GG Schmitt Boat Transom Gate This gate is constructed out of stainless steel. Measures approximately 18 1/2" H x 15 5/8" W tapered to 13 1/2" W overall. The inside measurements are 16 1/2" H x 13 5/8" W tapered to 11 1/2" W...

Stainless Steel Chaparral Boat Transom Gate Boat part number 7202116 is a new Transom Gate from GG Schmitt & Sons, part number Unavailable . Commonly used on Chaparral Sunesta 224/244 Boats, may be used on other boats.

Valterra Boat Bladex Valve Gate Boat part number 8102722 Boat part number 8102722 is a new 1 1/2" Bladex valve gate manufactured by Valterra, part number unavailable. Commonly used on Tracker Marine boats, part number 187366. May be used on other boats.

Valterra Boat Bladex Gate Valve This gate valve is constructed out of black colored marine grade plastic and stainless steel. The valve measures approximately 12" L x 3 1/4" W x 2 1/2" H overall.Features a 1 1/2" cable actuated gate valve, and a 5 FT cable.

Gemlux Boat NPT Threaded Ball Valve Boat part number 8105054 is a new 3/4 inch ball valve from Gemlux, part number BV-11F-2PC-075 . Commonly used on Tracker Boats, part number 175421 , but may be used on other boats...