1. Our marine bollard can be used at low temperatures at -50°C. 2. There are different dimensions for customer choices, which can be customized according to requirements. 3. Our double bitt bollard with compact base plate .

1. Our marine bollard can be used at low temperatures at -50°C. 2. There are different dimensions for customer choices, which can be customized according to requirements. 3. Our double bitt bollard with compact base plate .

The double braided rope uses a fully automatic computerized operating procedure and consists of a 12-strand rope core and an outer layer of multi-strand rope. This unique weaving structure and excellent process technology .

The durability of this rope does not decrease as the strength of the load is increased,it is suitable to use for high tension work loads,for mooring,or as a towing line. higher breaking strength than polypropylene.

Aramid fiber has a very high strength, weight is 6 times that of steel wire, 3 times that of glass fiber, 2 times that of high-strength nylon industrial yarn, and its tensile modulus is 3 times that of steel wire and 2 times that of glass fiber.

The 6 strand 100% nylon monofilament and nylon filament is similar to “Atlas”rope, It is a synthetic fiber rope formed from 100% nylon monofilament and continuous filament yarns. It is very easy to run on mooring winch.

Winch Line is made from a special 100% Ultra High Molecular Weight Polyethylene (UHMWPE). It's has low elongation, low weight, high strength, good ageing resistance .

Rope Jacket as method of protection could be applied to mooring ropes. Rope Jacket will prevent mooring rope abrasion and the life time of ropes will be longer with Perfection.

Capacity is normally higher than 200ton. Suitable for a lower angle. Long service life, up to 15-20 years. Multiple lines could share one bollard without affecting the mooring lines of adjacent ships.

Material: Cast Iron or Cast Steel Type: Staghorn(or Twin Horn) Head Type Installation Method: By Anchoring Bolts Capacity: 10Ton to 200Ton

T-Head Mooring Bollards had the features of small and very large load capacity sizes, can be made from ductile cast iron or cast steel material and cast-in or bolt-in mounting for option.

Rubber Fenders are usually installed on dock or ship, which could absorb collision energy during ships are landing. This will protect both ship and dock. cone Fender is an efficient rubber fender type that is used in various applications.