FRP Wire Gate Valve 1. Design and manufacture according to GB 12234-89 2, the structure length according to GB 12221-89 3, flange size according to JB /T 79-94 4, valve inspection and test according to GB 13927

Bronze Marine Gate Valve Bronze gate valve, with excellent wear resistance and corrosion resistance, good casting performance, is widely used in high load parts, such as bearing bush, pump body, marine screw...

Cast Iron Marine Gate Valve is suitable for controlling the opening and closing of the medium in the fuel pipeline, lubricating oil pipeline, water pipeline and steam pipeline to prevent backflow when the temperature does not exceed 120℃...

Marine Cast Steel Gate Valve Cast steel gate valve is a kind of valve commonly used in the bilge water suction pipeline of ships and other places. The utility model relates to a linear motion valve which regulates fluid flow ...

Flange Gate Valves The structure is compact, the design is reasonable, the valve rigidity is good, the channel is smooth, and the flow coefficient is small. Structural forms include elastic wedge single ram, rigid wedge single ram and double ram

Marine Gate valves Stainless Steel The stainless steel gate valve is a gate valve with a flexible wedge plate as the opening and closing plate, and the movement direction is perpendicular to the flow...

Marine gate valves are opening and closing gates, the movement direction of the gate is perpendicular to the direction of fluid flow, and are used extensively throughout the ship.

Chaparral 18 5/8 X 17 INCH /GG Schmitt Boat Transom Gate This gate is constructed out of stainless steel. Measures approximately 18 5/8" H x 17" W tapered to 15 1/2" W overall. The inside measurements are 16 1/2" H x 14 7/8" W tapered to 13 1/2" W,...

XRP Boat Check Valve 732612 This flapper valve is comprised of anodized aluminum. The product uses a hinged metal gate with rubber gasket and must be installed with the direction of flow and against gravity or force..

Baja Boat AFT Gate 40686 Constructed out of aluminum, these gate catches measure approximately 2" long x 1/2" wide x 1" high overall. Has a 1" wide opening that tapers to 3/8" wide. Has (10) right hand and (10) left hand catches.

Boat Gate Latch Catch 241602 Constructed out of aluminum, these gate catches measure approximately 2" long x 1/2" wide x 1" high overall. Has a 1" wide opening that tapers to 3/8" wide. Has (10) right hand and (10) left hand catches.

TCI Fabrication Boat Drain Gate This drain gate is constructed out of stainless steel, and measures approximately 17" L x 7 3/4" (tapers to 3 3/8") W x 3/16" Thick overall. Mounts with (4) 3/16" holes approximately 15 1/2" apart width and 5" apart height.