Marine Medium Frequency Induction Heating Equipment
Brand :XIFAN MARINE
Product origin :China
Delivery time :10days
Supply capacity :2000 pcs /day
1.Medium frequency melting furnace suit for steel, stainless steel, copper, gold, silver, and other materials melting.
2.Compared with thyristor medium frequency, energy saving at least 20%
Marine Medium Frequency Induction Heating Equipment
▲▲▲Important notice!!
1. Ensure that clean water is cooled and the inlet water temperature does not exceed 40 ℃, otherwise the machine will be easily damaged;
2. Please confirm the type of equipment, the additional function and the matching condition.
3. The design of induction coil requires that the inductance of induction coil be kept in the appropriate range. Please use the induction coil prepared by our company. If you make yourself, please consult our company to avoid improper parameters of induction coil, affect heating efficiency, or cause equipment damage;
4. This product belongs to our own intellectual property rights, protected by law, any unauthorized imitation, mapping, unmounted equipment damage, the company will not repair, and will reserve the right to investigate its infringement.
Safe caution:
1. The output voltage of the intermediate frequency power supply is 70-550V, so the output end of the intermediate frequency power supply, the compensation capacitor connection end, the induction coil joint all have the high voltage, may not be exposed to, in case the operator worker contacts after the occurrence electric shock danger;
2.Induction coil insulation damage should be immediately re-insulated or updated induction coil to prevent electrical shock; 2.
3. For any connection, the installation must take place when the power supply of the equipment is turned off in order to prevent electrical shock;
4. Maintenance of equipment must be carried out by professionally trained personnel to prevent electrical shock;
5. In order to operate safely, the operator shall wear insulating gloves, insulating shoes, insulating clothing, etc.;
6. In order to operate safely, intermediate frequency working table should be insulated board and other insulating materials.
The main parameters of medium frequency induction heating machine :
Model | XF-15 | XF-25 | XF-35 | XF-45 | XF-70 | XF-90 | XF-110 | XF-160 | ||||
Input power | 15KVA | 25KVA | 35KVA | 45KVA | 70KVA | 90KVA | 110KVA | 160KVA | ||||
Input current | 3~22A | 5~45A | 10~70A | 15~95A | 20~130A | 25~170A | 30~200A | 40~220A | ||||
Input voltage | 70~520V | 70~550V | 70~520V | 70~520V | 70~520V | 70~520V | 70~520V | 70~520V | ||||
Input power | 3-phase 380V±20% 50 or 60HZ | |||||||||||
Output fluctuating frequency | 1KHZ~20KHZ according to the requirements of customer’s heating work piece. | |||||||||||
Duty sycle | 100% 24 hours continuous work | |||||||||||
Power weight | 26KG | 28KG | 41KG | 50KG | 54KG | 79KG | 85KG | 115KG | ||||
Dimension （width*height*length）mm | 300*500*600 | 350*550*650 | 350*550*650 | 450*900*850 | 470*950*880 | |||||||
Medium cooling water requirements | ≥0.2Mpa ≥6/Min | ≥0.3Mpa ≥10/Min | ≥0.3Mpa ≥20/Min | ≥0.3Mpa ≥25/Min | ||||||||
Medium power cooling requirements | ≥0.2Mpa ≥3/Min | ≥0.2Mpa ≥4/Min | ≥0.2Mpa ≥6/Min | ≥0.2Mpa ≥8/Min | ||||||||
Power water route | One water in, one water out. | One water in , three water out. | ||||||||||
With timing control panel, timing parameters：（can be formulated 1~99s） | |||
Heating time | 0.1～99.9 seconds | Retain time | 0.1～99.9 seconds |
Shipment:
