Exd Oil-in-water Monitoring Device For Vessel
Brand :XIFAN MARINE
Product origin :China
Delivery time :5days
Supply capacity :3000units/day
Name:Oil Content Monitor
Alarm Point:1-15ppm adjustable
Power Supply:220VAC/110VAC±10%
Measure range:0-30ppm
Accuracy:Better than 5mg/L
Standard:IMO.Res.MEPC.107(49)
Display:LCD display
Exd Oil-in-water Monitoring Device For Vessel
All monitors in our range are inspected and tested to I.M.O. requirements at our factories prior to delivery.
The OCM-08G type oil-in- water monitor has been designed specifically for use in continuous monitoring of oil-in-condensate or oil-in-boiler feed water without specific environment condition, it is applicable to high water temperature.
This Exd Oil-in-water Monitorin g Device is suitable for application in the site where explosion preventing is required and dirty water with micro oil should be measured for discharge and control.
| Type: | OCM-08G |
| Range: | 0 –99mg/l |
| Accuracy | Better than 2mg/l |
| Linearity | better than 2 % |
| Display | 2 digits 7 segment LED's |
| Power Supply: | 220VAC 24 Volt AC/DC ± 10% |
| Consumption: | 5 VA |
| Alarm Points: | Adjustable between 1- 30 mg/l |
| Alarm Points works set: | 10mg/l |
| Alarm Indication: | Red LED's |
| Output Signal: | 0 - 20 mA or 4 - 20 mA, reversible Ri < 500 Ω |
| Sample Water Pressure: | 0,1 - 8bar |
| Sample Flow: | approx. 0,5 - 4 l/min depend. to pressure |
| Ambient Temperature: | - 20 to + 55° C |
| Sample Water Temperature: | + 1 to + 80° C |
| Size (over all): | 394mmW×280mmH×135mD |
| Degree of Protection: | IP 65 |
| Weight | 10 kg |
| Pipe Connections: | R 1/4" Female |
Shipment Details :
More Marine Bilge Alarm can be offered , kindly contact us for more details.
