15ppm Bilge Alarm System On Ship
Brand :XIFAN MARINE
Product origin :China
Delivery time :5days
Supply capacity :3000units/day
Name:Oil Content Monitor
Alarm Point:1-15ppm adjustable
Power Supply:220VAC/110VAC±10%
Measure range:0-30ppm
Accuracy:Better than 5mg/L
Standard:IMO.Res.MEPC.107(49)
Display:LCD display
15ppm Bilge Alarm System On Ship
The 15ppm Bilge Alarm device has been designed specifically for use in continuous monitoring of oil-in-bilge water, 15 ppm alarm and control of discharge, detection, memory and enquiry of alarm status. It is applicable to detect boiler condensate water.And it applies to oil and chemical industries as well.
The oily water separator 15 ppm alarm device use the technology of near infrared measurement, which can display the detected result in real time. The unit is supplied with 2 works-adjusted alarms. The set point (15ppm factory set) could be adjusted at any moment through the panel. If an alarm set point is exceed, the alarms are visible at the front panel and the appropriate relays are switched, that can be achieved the movement control of overrun closedown or the treatment of overrun recycle, and the memory and enquiry of alarm record. Furthermore, a 4 - 20 mA (equal to 0 15ppm) effective signal output is available for driving a recorder or external meter.
The ows 15 ppm certificate of OCM-15 type approval test has been obtained through comprehensive tests. This device is in accordance with the IMO-Resolution MEPC. 107 (49).
Xifan Marine supply all different type Marine Bilge Alarm , such as bilgmon 488 , Explosion Separation Oil Content Mete and OCM-15 Bilge Alarm .
Main Parameter :
| Range: | 0 - 30 mg/l can exceed to 50mg/l |
| Accuracy | Better than 5mg/l |
| Linearity | better than 2 % |
| Display | LCD display |
| Power Supply: | 220VAC/110VAC 10% |
| Consumption: | 10 VA |
| Alarm Points: | 1-15ppm |
| Alarm Points works set: | 15ppm |
| Alarm 1 delay | 0-10 second. |
| Alarm 2 delay | 0-10 second |
| Alarm output | Two way relays output |
| Alarm relay output contact value | 5A, 250VAC |
| Alarm relay output feedback signal test | Two way working status contact testing |
| Alarm Indication: | Red LED's |
| Output Signal: | 4 - 20 mA, reversible Ri < 500 |
| Sample Water Pressure: | 0.01 -6 bar |
| Sample Flow: | approx. 0.2 - 4 l/min depend on pressure |
| Ambient Temperature: | 0 to + 55° C |
| Size (over all): | 360 mm W x 240 mm H x 105 mm D |
| Degree of Protection: | IP 45 |
| Weight: | 8kg |
| Pipe Connections: | R 1/4" Female |
Shipment Details :
More Marine Bilge Alarm can be offered , kindly contact us for more details.
